1.Problem Solve.
Check whether the total amount of discharged prints and remaining paper
in the machine agrees with the amount indicated by the error message.
Remove and reinstall all the crossover racks. Clean the dryer entry rack. Clean the PS rack.
2.Problem Solve.
The paper jammed frequently after the crossover racks were set in their positions.
Remove and reinstall all the crossover racks.
3.Problem Solve.
The automatic cleaning rubber is damaged. Set the crossover racks so as to ensure that they are not
lifted above their positions, and then wait for servicing.
Replace the automatic cleaning rubber or automatic ,cleaning housing.
4.Problem Solve.
The paper jammed frequently immediately after the processing racks were cleaned.
Ensure that the rack guides are properly mounted.
5.Problem Solve.
Retract the dryer rack and then check the web belt.
If the belt is cut, it needs to repaired it immediately. Replace the web belt or dryer rack.
6.Problem Solve.
The dryer rack is unsteady after it is retracted.
If the dryer rack is significantly unsteady, it needs to be repaired. Replace the dryer rack (the screw section is damaged).
7.Problem Solve.
The dryer rack mounting section is unsteady. The screw mounting section
is cracked. As a temporarymeasure, secure the dryer rack with gummed
tape or the like. Replace the dyer duct section.
8.Problem Solve.
The paper is jammed near the squeegee rack. Clean the squeegee rack. Adjust the squeegee rack partition plate.
9.Problem Solve.
The paper is jammed in the dryer exit unit. Pull out the dryer exit
unit and then strongly push it back intoposition. If the problem
recurs, the engineer will visit you to perform checkout.
Have on hand a replacement unit depending on the situation.
10.Problem Solve.
The paper jams at a particular place. The engineer will visit you to
perform checkout. Furnish the detailedinformation about the problem.
Have on hand a replacement unit depending on the situation. - See more at: http://camerabazar.blogspot.com/search/label/FRONTIER#sthash.lxx0moBG.dpuf
1.Problem Solve.
Check whether the total amount of discharged prints and remaining paper in the machine agrees with the amount indicated by the error message.
Remove and reinstall all the crossover racks. Clean the dryer entry rack. Clean the PS rack.
2.Problem Solve.
The paper jammed frequently after the crossover racks were set in their positions.
Remove and reinstall all the crossover racks.
3.Problem Solve.
The automatic cleaning rubber is damaged. Set the crossover racks so as to ensure that they are not
lifted above their positions, and then wait for servicing.
Replace the automatic cleaning rubber or automatic ,cleaning housing.
4.Problem Solve.
The paper jammed frequently immediately after the processing racks were cleaned.
Ensure that the rack guides are properly mounted.
5.Problem Solve.
Retract the dryer rack and then check the web belt.
If the belt is cut, it needs to repaired it immediately. Replace the web belt or dryer rack.
6.Problem Solve.
The dryer rack is unsteady after it is retracted.
If the dryer rack is significantly unsteady, it needs to be repaired. Replace the dryer rack (the screw section is damaged).
7.Problem Solve.
The dryer rack mounting section is unsteady. The screw mounting section is cracked. As a temporarymeasure, secure the dryer rack with gummed tape or the like. Replace the dyer duct section.
8.Problem Solve.
The paper is jammed near the squeegee rack. Clean the squeegee rack. Adjust the squeegee rack partition plate.
9.Problem Solve.
The paper is jammed in the dryer exit unit. Pull out the dryer exit unit and then strongly push it back intoposition. If the problem recurs, the engineer will visit you to perform checkout.
Have on hand a replacement unit depending on the situation.
10.Problem Solve.
The paper jams at a particular place. The engineer will visit you to perform checkout. Furnish the detailedinformation about the problem.
Have on hand a replacement unit depending on the situation.